PT612F9019 60*120

*Note: Specifications for each product are requested individually, and the responsibility for specifications lies with each product. Variations may occur between the reports and the actual products, such as thickness description and water absorption.*

Title: TEST REPORT

Report No.: 25202000537

Sample Information:
– Sample Name: Rock Tiles
– Original Place: China
– Sample Sender: Quanzhou Huali Ceramics Co., Ltd.
– Sample Date: 12/03/2020 – 17/03/2020

Testing Authority:
– State Key Testing Laboratory of Building Ceramics and Sanitary Ware
– Comprehensive Technology Centre of Foshan Customs

Test Standards:
– Testing was conducted according to GB/T 4100-2015 (Appendix G) for dry-pressed ceramic tiles, Grade BIa, with water absorption (E) ≤ 0.5%.

Test Results:
1. Dimensions and Surface Quality:
– Length: Deviation within +0.6% and -0.03% to +0.01%
– Width: Deviation within +0.6% and +0.12% to +0.18%
– Thickness: Deviation within +5.96% and -0.5% to +0.2%
– Straightness of Sides: Maximum deviation from straightness within +0.9% to -0.5%

2. Rectangularity:
– Maximum deviation from rectangularity within -0.08% to +0.04%

3. Surface Flatness:
– Maximum deviation from flatness within -0.04% to -0.01%

4. Water Absorption:
– Percentage of water absorption: ≤ 3% (Class 3)

5. Breaking Strength:
– Average breaking strength: ≥ 1300 N
– Minimum breaking strength: ≥ 35 N/mm²

6. Abrasion Resistance:
– Passed the test for resistance to surface abrasion of glazed tiles intended for use on floors

7. Chemical Resistance:
– Resistance to low concentrations of acids and alkalis: Passed the tests
– Resistance to high concentrations of acids and alkalis: Passed the tests

8. Staining Resistance:
– Resistance to staining: Class 5

9. Crazing Resistance:
– Resistance to crazing: Passed the test for glazed tiles

Conclusion:
The tested sample of rock tiles met the requirements specified in GB/T 4100-2015 (Appendix G). It exhibited satisfactory results in terms of dimensions, surface quality, water absorption, breaking strength, abrasion resistance, chemical resistance, staining resistance, and crazing resistance.

*Note: Specifications for each product are requested individually, and the responsibility for specifications lies with each product. Variations may occur between the reports and the actual products, such as thickness description and water absorption.*

Note:
This report is specific to the tested sample and does not absolve other parties from their contractual and legal obligations. Reproduction of this report, in part or in full, without written approval from the issuing laboratory is prohibited.

If you require further clarification or have any questions, please contact the issuing laboratory: Comprehensive Technology Centre of Foshan Customs.