parquet L158010 15*80

Note: Specifications for each product are requested individually, and the responsibility for specifications lies with each product. Variations may occur between the reports and the actual products, such as thickness description and water absorption.

Title: TEST REPORT

Report No.: 25202000009

Sample Information:
– Sample Name: Wooden Tiles
– Sample Sender: Foshan Daike Ceramics Co., Ltd.
– Sample Date: 02/01/2020 – 13/01/2020

Testing Authority:
– State Key Testing Laboratory of Building Ceramics and Sanitary Ware
– Comprehensive Technology Centre of Foshan Customs

Test Standards:
– Testing was conducted according to ISO 13006:2018 for ceramic tiles, specifically Annex K for dry-pressed ceramic tiles with water absorption (E) between 6% and 10%, belonging to Group BIIb.

Test Results:
The following test results were obtained for the wooden tiles:

1. Dimensions and Surface Quality:
– Length: Deviation within +0.02% to +0.03%
– Width: Deviation within +0.17% to +0.25%
– Thickness: Deviation within -0.4% to +0.6%
– Straightness of Sides: Maximum deviation from straightness within +0.01% to +0.02%

2. Rectangularity:
– Maximum deviation from rectangularity within -0.04% to -0.02%

3. Surface Flatness:
– Maximum deviation from flatness within -0.04% to -0.03%

4. Water Absorption:
– Water absorption: 8.6%

5. Breaking Strength:
– Breaking strength: ≥ 18 N/mm²

6. Abrasion Resistance:
– Passed the test for resistance to surface abrasion of glazed tiles intended for use on floors

7. Chemical Resistance:
– Resistance to staining: Class 5
– Resistance to household chemicals and swimming pool salts: Passed the tests
– Resistance to low concentrations of acids and alkalis: Passed the tests
– Resistance to high concentrations of acids and alkalis: Test method available

Conclusion:
The tested wooden tiles conform to the requirements specified in ISO 13006:2018, Annex K, for dry-pressed ceramic tiles with water absorption between 6% and 10%, belonging to Group BIIb. The tiles exhibited satisfactory results in terms of dimensions, surface quality, water absorption, breaking strength, abrasion resistance, and chemical resistance.

Note:
This report is specific to the tested sample and does not absolve other parties from their contractual and legal obligations. Reproduction of this report, in part or in full, without written approval from the issuing laboratory is prohibited.

For further details or clarification, please contact the issuing laboratory: Comprehensive Technology Centre of Foshan Customs.